Cart totals
| Subtotal | $499.95 |
|---|---|
| Shipping | Shipping costs are calculated during checkout. |
| Tax | $0.00 |
| Total | $499.95 |
- I had 3 Cerec machines and switched to medit. It’s awesome and do not regret the switch one bit. This is the place to buy it bc Armen and Frank are a wealth of knowledge and Frank is awesome with support. He’s always there whenever I need him! - 10/10/2019
Medit i500 Intra-Oral Scanner - Loving my Medit i700. My crowns have never fit better, and scanning is SOO easy. I started with cad-ray with the i500. The training and support have been second to none. I upgraded to the i700 shortly after it came out, and recently had a warranty is... read moreLoving my Medit i700. My crowns have never fit better, and scanning is SOO easy. I started with cad-ray with the i500. The training and support have been second to none. I upgraded to the i700 shortly after it came out, and recently had a warranty issue with the new scanner. immediately after calling them with my problem. A new scanner was overnighted to my office, I was very pleased, and had minimal down time. read less - 4/05/2022
- Absolutely love dealing with this company. Purchased two intraoral scanners from them over the last 3 years and the support has been beyond exceptional. Frank patiently walked me through all the basics with many a phone call (to his personal cell p... read moreAbsolutely love dealing with this company. Purchased two intraoral scanners from them over the last 3 years and the support has been beyond exceptional. Frank patiently walked me through all the basics with many a phone call (to his personal cell phone, no less) on the first go round. Whenever we've even had a hint of technical difficulty there is ALWAYS a knowledgeable voice on the other end of the line. After 3 years of use a significant issue came up with the scanner and they went above and beyond to get it back up and running. Was so impressed (and I realized how dependent we've become on a scanner) that I purchased another one.Needed some assistance submitting a Valplast RPD design digitally this week. Damien worked me through it in literally 5 minutes and took the time to optimize my graphics card performance while he was there. Top shelf service.Certainly, the first place I go with any dental tech purchase. read less - 6/04/2022
- I Love it !!! I needed to replace my Omnicam because the computer hardware was old and not able to keep up with the software upgrades. The computer upgrade costs from Sirona were cost-prohibitive (another reason why the Medit is so good) and I wasn... read moreI Love it !!! I needed to replace my Omnicam because the computer hardware was old and not able to keep up with the software upgrades. The computer upgrade costs from Sirona were cost-prohibitive (another reason why the Medit is so good) and I wasn't about to make the same mistake twice and replace it with another system from Sirona. I was a bit unsure about making a big switch but after speaking with Nick Statly at Cad-Ray, he eliminated all of my reservations and I ordered it. I've used it for the past week and love it. Setting it up and getting it running was simple. I would not describe this as a do it yourself process, it's much easier. If you can make a cup of coffee you can set the scanner up and start making excellent scans. All one needs to do is watch the very well laid out and easy to follow videos and save a lot of money. The image quality and ease of use hands down beats the Omnicam. Also during the current pandemic, I really feel better about being able to cold sterlize the tips vs the omnicam's just "wiping down." I almost hope my desktop scanner craps out so I can get the Medit desktop. I'm glad I listened to you Nick!!! read less - 6/04/2020
Medit i500 Intra-Oral Scanner for the D.I.Y. Dentist - Get this scanner for $16,000 after our rebate! - I had a great experience with CAD RAY. I was lucky enough to have Frank DeLuca come down to my office to demo the Medit I700. Needless to say, we were in love with the technology and the great hands on demo. CAD RAY overnighted me the scanner and we ... read moreI had a great experience with CAD RAY. I was lucky enough to have Frank DeLuca come down to my office to demo the Medit I700. Needless to say, we were in love with the technology and the great hands on demo. CAD RAY overnighted me the scanner and we were off to the races. Any time we have had a technical question, Frank has personal helped me or put me in touch with one of his colleagues if he wasn’t available. All around, it was as 5 star experience! read less - 12/16/2021
- If your planning to buy dental oral scanner look for Jon. He will give you a great deal. He is very friendly and knowledgeable about the advantage of Medit I500. AGAIN, Don't forget to look for Jon for your next oral scanner. I highly recommend this ... read moreIf your planning to buy dental oral scanner look for Jon. He will give you a great deal. He is very friendly and knowledgeable about the advantage of Medit I500. AGAIN, Don't forget to look for Jon for your next oral scanner. I highly recommend this guy. read less - 1/09/2021
- I bought a i500 almost a year and a half ago. Sadly it ran into an issue with the cord after over a years use. Cad-ray was extremely quick to diagnose the issue and also send a replacement scanner. The quality and ease of scanning has been great! Als... read moreI bought a i500 almost a year and a half ago. Sadly it ran into an issue with the cord after over a years use. Cad-ray was extremely quick to diagnose the issue and also send a replacement scanner. The quality and ease of scanning has been great! Also very happy with the customer service. read less - 6/02/2022
- I live in Puerto Rico and Cad-Ray made my decision easy when it comes to purchasing Dental equipment. I decided to call after having connection issues with my i700 and Andy responded immediately. He was very pleasant to work with and within 2 days, r... read moreI live in Puerto Rico and Cad-Ray made my decision easy when it comes to purchasing Dental equipment. I decided to call after having connection issues with my i700 and Andy responded immediately. He was very pleasant to work with and within 2 days, received my brand new cord. I can always always rely on Cad-Ray for their incredible support and highly recommend this company to anyone looking to explore digital dentistry. read less - 12/30/2021
- The Medit i700 is a game changer in speed and overall comfort for patients. I find it much smaller than other brands and have done almost 50 appliances/aligner cases the past 2 months with no fit issues from my lab. Love this scanner!
Dr. Sherric... read moreThe Medit i700 is a game changer in speed and overall comfort for patients. I find it much smaller than other brands and have done almost 50 appliances/aligner cases the past 2 months with no fit issues from my lab. Love this scanner!
Dr. Sherrick
Auburn Lakes Orthodontics read less - 8/24/2021
Medit i700 - Honestly the best service that I've received in dental tech support. I had originally purchased a scanner with another supplier and was underwhelmed with the support I received. I switched over to CAD-Ray for my second scanner and have never been let... read moreHonestly the best service that I've received in dental tech support. I had originally purchased a scanner with another supplier and was underwhelmed with the support I received. I switched over to CAD-Ray for my second scanner and have never been let down. They are prompt and exceptionally knowledgeable about the products they support. Thank you CAD-Ray for keeping my practice moving smoothly! read less - 8/27/2021
- I was referred to CAD-Ray by Medit Instagram help service. I have purchased Medit i700 from Laura, I was please to work with her and the whole team. They offered the best customer service and the fast responses, especially Laura. I look forward for t... read moreI was referred to CAD-Ray by Medit Instagram help service. I have purchased Medit i700 from Laura, I was please to work with her and the whole team. They offered the best customer service and the fast responses, especially Laura. I look forward for the next purchase. read less - 12/07/2021
- Every time I need support for my scanner, the Cad-Ray team is there to help. I recently had a question on how to manipulate a scan and export it back to Medit Scan. Damien logged in and helped me out. Problem solved in under five minutes. Awesome ser... read moreEvery time I need support for my scanner, the Cad-Ray team is there to help. I recently had a question on how to manipulate a scan and export it back to Medit Scan. Damien logged in and helped me out. Problem solved in under five minutes. Awesome service. Thanks Cad-Ray support team! read less - 3/04/2022
- New user and absolutely love my Medit i500 scanner. Easy to use, fast, affordable and so quick for a first timer IOS user like myself. Customer service is fantastic, as are the sales people. It’s good to know you have strong knowledgeable people beh... read moreNew user and absolutely love my Medit i500 scanner. Easy to use, fast, affordable and so quick for a first timer IOS user like myself. Customer service is fantastic, as are the sales people. It’s good to know you have strong knowledgeable people behind the scenes ready to help at every turn. I would recommend this product highly. Happy in PA read less - 9/09/2020
When I decided to purchase a digital scanner I decided on user experience. They have provided the best experience I could have asked for, from online support, Facebook support, and in person courses. There is no better team to buy Medit from period... read moreWhen I decided to purchase a digital scanner I decided on user experience. They have provided the best experience I could have asked for, from online support, Facebook support, and in person courses. There is no better team to buy Medit from period. Do yourself a favor and buy from them if you are in the market for an intraoral scanner. read less - 6/16/2020
- I purchased Medit scanner few weeks ago . Frank and Nick have been really excellent answering my questions promptly. The scanner itself is wonderful with no back fees , customer service is top notch. The entire team works fast and helps you out. I st... read moreI purchased Medit scanner few weeks ago . Frank and Nick have been really excellent answering my questions promptly. The scanner itself is wonderful with no back fees , customer service is top notch. The entire team works fast and helps you out. I strongly recommend this scanner! read less - 6/17/2020Medit i500 Intra-Oral Scanner
- Armen Mirzayan's knowledge base sets CAD-RAY.COM apart from all other digital dental-equipment dealers. Not content with linking manufacturer support content, Armen's team provide instant feedback to any equipment queries, in-depth video tutorials, a... read moreArmen Mirzayan's knowledge base sets CAD-RAY.COM apart from all other digital dental-equipment dealers. Not content with linking manufacturer support content, Armen's team provide instant feedback to any equipment queries, in-depth video tutorials, and regular product testing, streamlining, and pushing the boundaries of their products - be it software, hardware, or connectivity between various brands. I highly recommend this team if you want to fully utilise your equipment and have the backup needed going forward! read less - 11/05/2019
CAD-Ray.com Membership -
Purchased a Medit i500 from CAD-Ray earlier this year and I really like the scannner. It has great features at a great price point. And the support of the CAD-Ray team has been awesome. They have a great amount of online resources for the DIYers and ... read morePurchased a Medit i500 from CAD-Ray earlier this year and I really like the scannner. It has great features at a great price point. And the support of the CAD-Ray team has been awesome. They have a great amount of online resources for the DIYers and have helpful employees to help after the sale as well. I highly recommend them. read less - 6/16/2020
- Laura has always been so helpful with the medit when we needed assistance or resources. The training she provided the office was invaluable! She is quick to respond whenever we reach out. 13/10 - would recommend her to anyone looking to get a medit ... read moreLaura has always been so helpful with the medit when we needed assistance or resources. The training she provided the office was invaluable! She is quick to respond whenever we reach out. 13/10 - would recommend her to anyone looking to get a medit scanner. read less - 12/16/2021
- I was dragging my feet before purchasing my first scanner because I was apprehensive of the effort required to change to a digital workflow. Laura assured me my fears were overblown and because of her patience and exceptional training abilities it h... read moreI was dragging my feet before purchasing my first scanner because I was apprehensive of the effort required to change to a digital workflow. Laura assured me my fears were overblown and because of her patience and exceptional training abilities it has been a rewarding and relatively seamless transition to the world of scanning. I never dreamed implementation would have been this easy and its attributed to Laura's skillful training ability. The scanner is wonderful and powerful, but we would have never been able to unlock its potential without her assistance. read less - 5/07/2021
- I'm a dentist in Maine and have been working remotely with CAD-RAY for about 5 years. They do all my implant planning and fabrication of surgical guides. I just send them a CBCT image and digital impressions and they take care of all the rest, it cou... read moreI'm a dentist in Maine and have been working remotely with CAD-RAY for about 5 years. They do all my implant planning and fabrication of surgical guides. I just send them a CBCT image and digital impressions and they take care of all the rest, it couldn't be smoother. I've only had good experiences with CAD-RAY, and am very grateful for this awesome service they offer. read less - 6/02/2019
- A while ago I became interested in an intra oral scanner for my office especially for dental sleep medicine and TMJ appliances. I searched online for Medit and found cad ray. Laura from Cad-ray quickly responded and set up a zoom meeting so she could... read moreA while ago I became interested in an intra oral scanner for my office especially for dental sleep medicine and TMJ appliances. I searched online for Medit and found cad ray. Laura from Cad-ray quickly responded and set up a zoom meeting so she could demo the unit. Great job at helping me understand. She set up the financing and I got my unit. A few glitches with my internet speed and getting IT to help with my upload and download speeds and I was ready to go. Every time I had a question I texted Laura and almost like she was waiting for my call she responds. We it turned out my unit wasn't just right so she immediately responded we will replace you unit. Laura has been a joy to work with and the customer service given will only encourage me to do business with cad-ray again.
Benjamin Polan DMD, D,ABDSM read less - 8/27/2021Medit i700 - Cad-ray has to be the best company to work with when it comes to digital dentistry solutions. Here are the reasons why: 1. Experience. Everyone in the company has extensive experience in dentistry. They have used all digital platforms and offer custo... read moreCad-ray has to be the best company to work with when it comes to digital dentistry solutions. Here are the reasons why: 1. Experience. Everyone in the company has extensive experience in dentistry. They have used all digital platforms and offer customers first hand experience. 2. Honesty. Based on their experience they share all the good/bad of different systems. They work with you to find a solution that works best for you. Not sell you the piece of the equipment that gives them the biggest commission. 3. Support. Cad-ray offers the missing piece of the dentist/digital manufacturer puzzle. Many other distributors sell you a piece of equipment but don’t have true day-to-day experience with that equipment. Cad-ray’s team openly share their expertise to help customers optimize their workflows with great technology. 4. Passionate. The Cad-ray team is extremely passionate about their craft. They truly believe in what they have to offer. I took Armen Mirzayan’s course on intraoral scanning and it was truly mind blowing. Armen’s insights will help any dentist optimize their craft. I purchased the full sprintray 3d printing ecosystem the help of Frank. I plan to purchase more equipment from cad-ray. Also, Jesse is a genius in regards to all aspect of digital workflows. I’m truly grateful for this company and everyone who I’ve worked with so far. read less - 10/07/2022
- Still beginner to use IO scanner. best customer service. Live training was very useful. Andy Nova was great in improving my skill for scanning and showing me all features. Thank you. - 5/19/2022Medit i700
- I was dragging my feet before purchasing my first scanner because I was apprehensive of the effort required to change to a digital workflow. Laura assured me my fears were overblown and because of her patience and exceptional training abilities it h... read moreI was dragging my feet before purchasing my first scanner because I was apprehensive of the effort required to change to a digital workflow. Laura assured me my fears were overblown and because of her patience and exceptional training abilities it has been a rewarding and relatively seamless transition to the world of scanning. I never dreamed implementation would have been this easy and its attributed to Laura's skillful training ability. The scanner is wonderful and powerful, but we would have never been able to unlock its potential without her assistance. read less - 8/31/2021Medit i700
- This company is genuinely amazing. Amazingly good products, but the thing that sets them apart is the support. Frank and Sean have answered any questions I have unbelievably fast. And I LOVE the DOF Craft 5x milling unit. Learning the flow of same da... read moreThis company is genuinely amazing. Amazingly good products, but the thing that sets them apart is the support. Frank and Sean have answered any questions I have unbelievably fast. And I LOVE the DOF Craft 5x milling unit. Learning the flow of same day milling was tricky for me, but they held my hand the whole way. Can’t go wrong here. read less - 1/06/2024
- I was on the fence on getting a scanner for years and finally pulled the trigger. CAD-Ray's support and knowledge has made this one of the best investments in my practice to date. When I spoke with Damien on the phone about my options he literally sa... read moreI was on the fence on getting a scanner for years and finally pulled the trigger. CAD-Ray's support and knowledge has made this one of the best investments in my practice to date. When I spoke with Damien on the phone about my options he literally saved me thousands after figuring out what my exact needs were. I went with the Medit i600, MSI laptop and 3D dental systems cart. The final product looks and feels as premium as it gets. read less - 2/21/2024
-
I got the Medit scanner last fall and I have been nothing but impressed by it and the support by CAD-Ray. The level of support, training videos, and continuously upgraded software is really impressive. If you are on the fence, you should feel confide... read moreI got the Medit scanner last fall and I have been nothing but impressed by it and the support by CAD-Ray. The level of support, training videos, and continuously upgraded software is really impressive. If you are on the fence, you should feel confident in moving forward with CAD-Ray. read less - 6/16/2020
- When I bought my first scanner a few years ago I was blown away by CAD-RAY’s support! They do a great job of getting you and your team ready to go with it. Frank D. has been a huge help with getting us confident with our scanners and making sure we a... read moreWhen I bought my first scanner a few years ago I was blown away by CAD-RAY’s support! They do a great job of getting you and your team ready to go with it. Frank D. has been a huge help with getting us confident with our scanners and making sure we are taken care of. He and his colleagues at CAD-RAY are always a responsive to our calls. Thank you! read less - 2/21/2023
- The D.I.Y. Medit i500 package was right for me. I bought a nice gaming PC for my 2 operative rooms, downloaded the software, watched some videos, and started scanning. It's really easy to use, my crowns fit better with fewer adjustments, and they cos... read moreThe D.I.Y. Medit i500 package was right for me. I bought a nice gaming PC for my 2 operative rooms, downloaded the software, watched some videos, and started scanning. It's really easy to use, my crowns fit better with fewer adjustments, and they cost less because they are made model-less and without impression materials. I will start to see a return on investment in less than 2 years and it makes my work more fun, and I can deliver better results. Armen puts on a 2 day course which is very helpful to refine your technique. Start with watching the videos, scan your employees, and then use it on patients. I considered buying an iTero Element 2 and I'm so glad I didn't. The Medit is smaller, as good or better, and it costs ~$25,000 less over the course of 5 years. Ongoing fees for other scanners are a joke. Medit keeps providing updates that make the software even better and there are no additional charges. read less - 3/29/2020Medit i500 Intra-Oral Scanner for the D.I.Y. Dentist - Get this scanner for $16,000 after our rebate!
- Absolutely a phenomenal company. Everyone you engage with is extremely knowledgeable and helpful.I’m sure they get the same questions day in, day out but they are happy to help you without being condescending. The entire team has been helpful through... read moreAbsolutely a phenomenal company. Everyone you engage with is extremely knowledgeable and helpful.I’m sure they get the same questions day in, day out but they are happy to help you without being condescending. The entire team has been helpful through phone calls, the Cad-Ray FB group, and recorded webinars. Jonathan helped me get a great deal, Laura was awesome on the webinar, Damien is always answering questions on FB, and Armen had a great in-person presentation in Dallas. 100% recommend. read less - 4/22/2022
- I recently made a purchase from Cad-Ray and the experience was truly outstanding. From my initial enquiry, Nick was incredibly supportive and knowledgeable, answering all of my questions thoroughly and guiding me to the product that would best meet m... read moreI recently made a purchase from Cad-Ray and the experience was truly outstanding. From my initial enquiry, Nick was incredibly supportive and knowledgeable, answering all of my questions thoroughly and guiding me to the product that would best meet my needs. What really set this experience apart was his non-pushy approach. Nick showed genuine interest in understanding my specific requirements, ensuring that I would be fully satisfied with my choice. This type of customer service is rare and it made the whole process much more enjoyable. I can confidently recommend Cad-Ray to others not just for their high-quality products, but for their exceptional customer service. A big thank you to Nick and the entire Cad-Ray team for their professionalism and dedication. read less - 5/17/2023
- After weeks of research I purchased the i700 through Nick at cad-ray. My office has never used a scanner before and despite the great pricing, this was still a major purchase for me. Nick was incredibly helpful guiding me through the process while an... read moreAfter weeks of research I purchased the i700 through Nick at cad-ray. My office has never used a scanner before and despite the great pricing, this was still a major purchase for me. Nick was incredibly helpful guiding me through the process while answering my many questions. The customer service was very responsive and my friends who have purchased medit scanner were correct that this is the way to go. 5 Stars! read less - 5/08/2021
Home » Cart